blade area
英 [bleɪd ˈeəriə]
美 [bleɪd ˈeriə]
网络 叶片面积; 翼面积; 桨叶面积; 叶面积
双语例句
- Stage is added to a compressor and the blade design of corresponding stages is adjusted ( broaden the outlet area).
通常是给压气机增加零级并调整相应级的叶片设计（开大出口面积）。 - The results indicated that under the premise of normal starting, the optimal adjusting mode is half adjusting blade angles when pumping station average head is locating high efficiency area, and also the head variety range is small.
结果表明，当泵站平均扬程位于高效区内且扬程变幅较小时，在保证正常起动的前提下，泵站最优工况调节方式为半调节。 - The conception of uniform acceleration blade channel equivalent cone angle and that of ununiform acceleration band area factor of common blade channel is also put forward at the same time.
同时提出了匀加速叶道的当量锥角，以及寻常叶道非匀加速区面积系数两个新概念。 - Anatomic characteristics of leaf blade of 19 fine forage grasses in Semi-arid Loess Hilly Area
半干旱黄土丘陵区牧草叶片的解剖学研究 - Other causes include the out-of-tolerance of blade chord width between adjacent blades, the undersize contact area of serrated working side and the local wearing of non-working side.
而相邻原机件叶片弦宽尺寸超差，锯齿形工作接触面积小，以及非工作面局部碰磨，是引发故障的次要因素。 - Now, in fan blade construction research area, realizing fan blade surface design by applying computer gains recognition. Therefore, there is a good market forecasting for developing blower fan blade CAD software in middle and small enterprises.
目前，在叶片造型研究中，运用计算机技术实现叶片曲面设计得到了广泛重视，开发面向中小型企业的风机叶片CAD软件有着良好的市场前景。 - The most deformation occurs at the joint of outlet of blade and band, the deformation increases gradually from crown to band, which is the sensitivity area of vibration.
产生最大变形的部位是转轮叶片的出水边与下环的连接处，且从上冠到下环变形量逐渐增大，即此部位就是叶片振动的敏感区域； - This fits the critical sound velocity area produced in the blade channels when the inlet Mach number is 0.3, and shows the shock wave structure in the blade channels can help wall three dimensional flow area improved.
这与叶栅通道内声速区产生的临界进口马赫数0.3吻合，说明了叶栅中激波系结构对通道内的端壁区三维流动有改善作用。 - The leading edge of gas turbine blade is a crucial heat transfer area, film cooling is usually applied to protect this area in industry.
燃气轮机叶片的前缘是最关键的传热区，工业界通常采用气膜冷却来保护前缘。 - Blade tails left obvious wake area on the static pressure contour.
每个叶片的尾部在蜗壳内的静总压分布图上留下了明显的尾迹区。